From: beda jain (bpjain@xxxxxxxxx)
Date: Wed Jul 10 2002 - 11:40:40 GMT-3
Hi,
I have tested this , it work if you have eigrp running in remote router or
if you have sub interface in remote router.
Thanks,
Beda
At 03:41 AM 7/10/2002 -0700, Harish DV/peakxv wrote:
>Steve,
>
>I have tested this with 12.1(14) on a 2501 and it works
>
>Harish
>
>
>
>
>
> steven.j.nelson@b
>
> t.com To:
> ccielab@groupstudy.com
> Sent
> by: cc:
>
> nobody@groupstudy Subject: IPX Network
> Discovery in IOS 12.1(13)
> .com
>
>
>
>
>
> 07/10/2002
> 02:20
>
> AM
>
> Please respond
> to
>
> steven.j.nelson
>
>
>
>
>
>
>
>
>
>Group,
>
>I have been mucking about with IPX lately and found some issues with
>discovering your IPX network using the standard method of debug IPX packet.
>
>I have done the usual created some subs, given them different IPX addresses
>and encaps then applied the debug, sat back and waited... and nothing.
>
>I have also tested this on 12.1(15) GD code and it is exactly the same, I
>was expecting the standard network x has blah encaps, expected blah...
>
>Has anyone else seen this ?
>
>Steve
>
>Steve Nelson
>Customer Engineer
>BT Ignite- National Solutions
>T: +44 (0)1422 338881 M: +44 (0)7811 944172
>e-mail: steven.j.nelson@bt.com
>pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> > British Telecommunications plc
> > Registered office: 81 Newgate Street London EC1A 7AJ
> > Registered in England no. 1800000.
> > This electronic message contains information from British
>Telecommunications plc which may be privileged or confidential. The
>information is intended to be for the use of the individual(s) or entity
>named above. If you are not the intended recipient be aware that any
>disclosure, copying, distribution or use of the contents of this
>information
>is prohibited. If you have received this electronic message in error,
>please
>notify us by telephone or email (to the numbers or address above)
>immediately.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:25 GMT-3