From: steven.j.nelson@xxxxxx
Date: Wed Jul 10 2002 - 08:11:08 GMT-3
Thanks H
Must be a 3600 thang...
Steve
-----Original Message-----
From: Harish DV/peakxv [mailto:harish.dv@peakxv.net]
Sent: 10 July 2002 12:09
To: Nelson,SJ,Steven,IVNH33 C
Cc: ccielab@groupstudy.com; nobody@groupstudy.com
Subject: RE: IPX Network Discovery in IOS 12.1(13)
Here u go..
interface Ethernet0.1
ipx network 200 encapsulation ARPA
!
interface Ethernet0.2
ipx network 100 encapsulation SAP
!
interface Ethernet0.3
ipx network 300
!
interface Ethernet0.4
ipx network 400 encapsulation SNAP
r1#debug ipx packet
IPX packet debugging is on
r1#
1d04h: IPX: Et0.3:100.0002.4bac.3031->100.ffff.ffff.ffff ln= 56 tc=00 pt=01
ds=0
453 ss=0453, rcvd
1d04h: IPX: Et0.3:100.0002.4bac.3031->100.ffff.ffff.ffff ln= 56 tc=00 pt=01
ds=0
453 ss=0453, bad pkt
so 100 is the correct network #
r1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS56I-L), Version 12.1(14), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 25-Mar-02 16:58 by kellythw
Image text-base: 0x03078D9C, data-base: 0x00001000
Harish
steven.j.nelson@b
t.com To:
harish.dv@peakxv.net
cc:
ccielab@groupstudy.com, nobody@groupstudy.com
07/10/2002 03:48 Subject: RE: IPX Network
Discovery in IOS 12.1(13)
AM
Harish
Thanks, can you post the output.
My boxes are all 36's I have noticed that if I do a debug ipx all I get
some
weird traceback output.. Maybe a bug..
Cheers
Steve
-----Original Message-----
From: Harish DV/peakxv [mailto:harish.dv@peakxv.net]
Sent: 10 July 2002 11:42
To: Nelson,SJ,Steven,IVNH33 C
Cc: ccielab@groupstudy.com; nobody@groupstudy.com
Subject: Re: IPX Network Discovery in IOS 12.1(13)
Steve,
I have tested this with 12.1(14) on a 2501 and it works
Harish
steven.j.nelson@b
t.com To:
ccielab@groupstudy.com
Sent by: cc:
nobody@groupstudy Subject: IPX Network
Discovery in IOS 12.1(13)
.com
07/10/2002 02:20
AM
Please respond to
steven.j.nelson
Group,
I have been mucking about with IPX lately and found some issues with
discovering your IPX network using the standard method of debug IPX packet.
I have done the usual created some subs, given them different IPX addresses
and encaps then applied the debug, sat back and waited... and nothing.
I have also tested this on 12.1(15) GD code and it is exactly the same, I
was expecting the standard network x has blah encaps, expected blah...
Has anyone else seen this ?
Steve
Steve Nelson
Customer Engineer
BT Ignite- National Solutions
T: +44 (0)1422 338881 M: +44 (0)7811 944172
e-mail: steven.j.nelson@bt.com
pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> British Telecommunications plc
> Registered office: 81 Newgate Street London EC1A 7AJ
> Registered in England no. 1800000.
> This electronic message contains information from British
Telecommunications plc which may be privileged or confidential. The
information is intended to be for the use of the individual(s) or entity
named above. If you are not the intended recipient be aware that any
disclosure, copying, distribution or use of the contents of this
information
is prohibited. If you have received this electronic message in error,
please
notify us by telephone or email (to the numbers or address above)
immediately.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:25 GMT-3