From: Raymond Jett (rajett@xxxxxxxxx)
Date: Tue Jul 09 2002 - 23:43:12 GMT-3
Here's your answer!
http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/arbook/aripx.
htm#xtocid1139120
The IPX default route for packets is -2 (or FFFFFFFE)
Disable the default route and you can use that network number
Raymond
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jaspreet Bhatia
Sent: Tuesday, July 09, 2002 9:09 PM
To: ccielab@groupstudy.com
Subject: IPX network #
Folks,
I am trying to configure the IPX network FFFFFFFE on my
interface and it says that the range of addresses that can be configured
is FFFFFFFD but the CCO says that you can give network nos. up to FFFFFFFE
When entering the IPX address syntax, use the following format:
IPX network address1..FFFFFFFE
IPX node addressx.x.x where x is 0..FFFF
IPX addressipx_net.ipx_node (for example 3.0034.1245.AB45 or
A43.0000.0000.0001)
What am I doing wrong here ?
Thanks
Jaspreet
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:24 GMT-3