From: Volkov, Dmitry (Toronto - BCE) (dmitry_volkov@xxxxxxxxx)
Date: Tue Jul 09 2002 - 13:46:31 GMT-3
By default, OSPF can install only 4 parallel routes to the same destination.
This limit can be changed using "maximum-paths" command (range 1-6).
By default all dyn routing protocols supply not more than 4 routes to
destination
to the routing table. Only BGP is limited to 1 route by default.
Dmitry Volkov
-----Original Message-----
From: Kavanagh, Bob [mailto:BKavanagh@ikon.com]
Sent: Tuesday, July 09, 2002 12:07 PM
To: 'Diehm, Brian'; Ccielab (E-mail)
Subject: RE: OSPF load balancing
OSPF will provide equal-cost load balancing provided you have 'ip
maximum-paths' configured. Unequal-cost load balancing can be achieved
using IGRP/EIGRP in conjunction with the 'variance' command.
Regards,
Bob
-----Original Message-----
From: Diehm, Brian [mailto:Brian.Diehm@hp.com]
Sent: Tuesday, July 09, 2002 7:28 AM
To: Ccielab (E-mail)
Subject: OSPF load balancing
If memory serves me right OSPF does not load balance. Is that correct?
Brian
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:23 GMT-3