From: Harish DV/peakxv (harish.dv@xxxxxxxxxx)
Date: Fri Jul 05 2002 - 06:08:57 GMT-3
I am testing dlsw backup peer setup with 3 routers. Here is the setup
R3
|
|
|
----------------------------
| |
| |
| |
R6 R4
All three routers are connected over frame with PVCs from R3 - R4 and R3-R6
R3-R4 is the primary peer
R3-R6 is the backup peer
The problem:
I am using a linger of 3 mins. Intially R3 establishes a peer to R4 and R3
- R6 is in Disconnet state which is OK.
Now I disconnet the R3-R4 peer and after 3 mins the R3-R6 comesup which is
also fine.
I bring back the R3-R4 peer again. But R3-R6 peer also stays active for
ever.
Not able to makeout where the problem is.
Here are the configs relevent configs:
R3
dlsw local-peer peer-id 135.7.69.6
dlsw remote-peer 0 tcp 135.7.24.2
dlsw remote-peer 0 tcp 135.7.24.4 backup-peer 135.7.24.2 linger 3
interface TokenRing0/0
ip address 135.7.69.6 255.255.255.0
R4
dlsw local-peer peer-id 135.7.24.2 promiscuous
interface TokenRing0
ip address 135.7.24.2 255.255.255.0
R6
dlsw local-peer peer-id 135.7.24.4
dlsw remote-peer 0 tcp 135.7.69.6
interface TokenRing0
ip address 135.7.24.4 255.255.255.0
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:19 GMT-3