From: Prakash H Somani (pdsccie@xxxxxxxxxxxxxx)
Date: Thu Jul 04 2002 - 11:53:58 GMT-3
Hi,
I have also faced the same problem. Can u increase load threshold
to higher figure and check ???
regards...Prakash
On Mon, 01 Jul 2002 lrlab wrote :
>Group:
>
>Any idea why a OSPF deman circuit would work fine until I added
>ppp multi and
>dialer load 1 at the dialer on both ends. Once I do that the
>link flaps.
>Removed the lines from both and it returns to a normal (working)
>state. When
>I do the debug IP OSPF mon I see the lsa. I have added the no
>peer nei at
>both ends. here are the affested part of the configs from both
>without the ppp
>multi and dialer load 1.
>
>
>r3#sh run
>hostname r3
>
>username r6 password 0 cisco
>
>interface BRI0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0555100001
> isdn spid2 0555300001
> ppp authentication chap
>!
>interface Dialer1
> ip address 15.15.15.2 255.255.255.0
> encapsulation ppp
> ip ospf authentication message-digest
> ip ospf message-digest-key 1 md5 cisco
> dialer pool 1
> dialer remote-name r6
> dialer idle-timeout 45
> dialer string 5552000
> dialer-group 1
> no peer neighbor-route
> ppp authentication chap
>!
>router ospf 10
> router-id 3.3.3.3
> log-adjacency-changes
> area 1 stub no-summary
> network 15.15.15.2 0.0.0.0 area 1
> network 150.100.4.3 0.0.0.0 area 1
>
>!
>access-list 100 permit ip any any
>dialer-list 1 protocol ip list 100
>
>
>
>r6#sh run
>hostname r6
>
>username r3 password 0 cisco
>isdn switch-type basic-ni
>!
>interface BRI0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0555200001
> isdn spid2 0555400001
> ppp authentication chap
>!
>interface Dialer1
> ip address 15.15.15.1 255.255.255.0
> encapsulation ppp
> ip ospf authentication message-digest
> ip ospf message-digest-key 1 md5 cisco
> ip ospf demand-circuit
> dialer pool 1
> dialer remote-name r3
> dialer idle-timeout 45
> dialer string 5551000
> dialer-group 1
> no peer neighbor-route
> ppp authentication chap
>!
>router ospf 10
> router-id 6.6.6.6
> log-adjacency-changes
> area 0 authentication message-digest
> area 1 stub no-summary
> passive-interface Serial0
> network 15.15.15.1 0.0.0.0 area 1
> network 150.100.2.1 0.0.0.0 area 0
> network 150.100.4.1 0.0.0.0 area 1
> network 150.100.50.41 0.0.0.0 area 2
>!
>ip classless
>ip http server
>!
>access-list 100 permit ip any any
>dialer-list 1 protocol ip list 100
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:18 GMT-3