From: Sudhanshu Gupta (sudhanshu.gupta@xxxxxxxxxxx)
Date: Thu Jul 04 2002 - 01:14:52 GMT-3
Tom/Kym,
I don'tthink it should bother you as far as your dlsw peers are formed. DLSW is
infact used as an encapsulation method to transport SNA and netbios traffic ov
er the network. You can use it for forwarding sna & netbios over IP networks. D
LSW being a switching mechanism does not provide full routing, but instead prov
ides switching at the layer 2 of sna and encapsulation in TCP/IP for transport
over the any IP network and so Internet.
I hope i am clear enough.
-sudhanshu
> -----Original Message-----
> From: Tom Young [SMTP:gitsyoung@yahoo.co.jp]
> Sent: Monday, July 01, 2002 8:57 PM
> To: kym blair
> Cc: ccielab@groupstudy.com
> Subject: Re: NetBIOS through Internet
>
> Hi, kym
> Thank you for your kindness, I always got your help,
> thanks alot.
> Regard the sample you provide me, it is right. Infact
> I always used it. But only for leased line or framerelay.
> This time I will transfer the packet into Internet. I
> couldn't besure it will working, could you ensure it? Have
> you been used this way for transfering the SNA or NetBIOS
> for internet?
>
> Thanks again
>
> Tom
>
> --- kym blair <kymblair@hotmail.com> $B$+$i$N%a%C%;!<%8!'(J
> > Tom,
> >
> > I'm not good with DLSW+, but this should point you
> > in the right direction.
> > Hopefully, someone who has NetBIOS experience will
> > give you better advice:
> >
> > Router 1:
> >
> > dlsw local-peer peer-id 192.168.1.1
> > dlsw remote-peer 0 tcp 132.174.15.7
> > dlsw bridge-group 3
> >
> > interface ethernet 0
> > bridge-group 3
> >
> > bridge 3 protocol ieee
> >
> > Router 2:
> >
> > dlsw local-peer peer-id 132.173.15.7
> > dlsw remote-peer 0 tcp 192.168.1.1
> > dlsw bridge-group 3
> >
> > interface ethernet 0
> > bridge-group 3
> >
> > bridge 3 protocol ieee
> >
> > HTH, Kym
> >
> > >From: Tom Young <gitsyoung@yahoo.co.jp>
> > >Reply-To: Tom Young <gitsyoung@yahoo.co.jp>
> > >To: ccielab@groupstudy.com
> > >Subject: NetBIOS through Internet
> > >Date: Mon, 1 Jul 2002 02:04:48 +0900 (JST)
> > >
> > >I am facing a difficult question now, I have to
> > make a
> > >network for one company that transmit the NetBIOS
> > through
> > >internet. You know I am a fresh man. I know
> > somebody give
> > >me a idea.
> > >If you have the experience of that and could
> > provide me a
> > >configuration sample, it is very great.
> > >
> > >Thanks alot
> > >Tom
> > >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:18 GMT-3