From: Anthony Pace (anthonypace@xxxxxxxxxxx)
Date: Wed Jul 03 2002 - 22:11:46 GMT-3
Change the OSPF network type and this can toggle the hello/dead timers.
Anthony Pace
On Wed, 3 Jul 2002 12:03:48 -0400, "Logan, Harold" <loganh@mccfl.edu>
said:
> I'm going to assume that this has to do with a practice lab that has
> told you to set the ospf hello and dead timers to some value on a link,
> without using the two commands you mentioned. Take a look at the values
> you're supposed to change the hello and dead timers to, and see if
> anything jumps out at you. If you're still running into trouble, post
> those values to the list.
>
> hth,
> Hal
>
> > -----Original Message-----
> > From: Rajani Deshpande [mailto:rajani_desh@yahoo.com]
> > Sent: Wednesday, July 03, 2002 11:08 AM
> > To: ccielab@groupstudy.com
> > Subject: OSPF hello interval
> >
> >
> > Hi,
> >
> > How to change ospf hello or dead interval, without
> > using command ip ospf hello-interval or ip ospf
> > dead-interval ?
> >
> > thnanks
> >
> > rajani
> >
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:18 GMT-3