From: Meyer, J. (Johan) (JohanMe@xxxxxxxxxx)
Date: Tue Jul 02 2002 - 11:04:54 GMT-3
You must stipulate a key with the ntp server command
and the output should show
show ntp associations details
172.8.4.4 configured, authenticated, our_master, sane, valid, stratum 8
Johan
-----Original Message-----
From: elping [mailto:elpingu@acedsl.com]
Sent: Sunday, June 30, 2002 10:47 PM
To: ccielab@groupstudy.com
Subject: NTP authentication
I have the following config....on two routers ....I am certain this is a
correct config..but feel free to correect me....
now is there a way to tell with a show command if authentication is
configured..
I have tryed
sh ntp ass det
sh ntp sta
no mention on authentication
router 4
ntp authentication-key 1 md5 14141B180F0B 7
ntp authenticate
ntp trusted-key 1
ntp master 3
!
!
int lo0
ip address 153.10.4.4 255.255.255.0
router 1
ntp authentication-key 1 md5 02050D480809 7
ntp authenticate
ntp trusted-key 1
ntp clock-period 17180199
ntp server 153.10.4.4
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:17 GMT-3