From: Tom Young (gitsyoung@xxxxxxxxxxx)
Date: Mon Jul 01 2002 - 12:26:41 GMT-3
Hi, kym
Thank you for your kindness, I always got your help,
thanks alot.
Regard the sample you provide me, it is right. Infact
I always used it. But only for leased line or framerelay.
This time I will transfer the packet into Internet. I
couldn't besure it will working, could you ensure it? Have
you been used this way for transfering the SNA or NetBIOS
for internet?
Thanks again
Tom
--- kym blair <kymblair@hotmail.com> $B$+$i$N%a%C%;!<%8!'(B
> Tom,
>
> I'm not good with DLSW+, but this should point you
> in the right direction.
> Hopefully, someone who has NetBIOS experience will
> give you better advice:
>
> Router 1:
>
> dlsw local-peer peer-id 192.168.1.1
> dlsw remote-peer 0 tcp 132.174.15.7
> dlsw bridge-group 3
>
> interface ethernet 0
> bridge-group 3
>
> bridge 3 protocol ieee
>
> Router 2:
>
> dlsw local-peer peer-id 132.173.15.7
> dlsw remote-peer 0 tcp 192.168.1.1
> dlsw bridge-group 3
>
> interface ethernet 0
> bridge-group 3
>
> bridge 3 protocol ieee
>
> HTH, Kym
>
> >From: Tom Young <gitsyoung@yahoo.co.jp>
> >Reply-To: Tom Young <gitsyoung@yahoo.co.jp>
> >To: ccielab@groupstudy.com
> >Subject: NetBIOS through Internet
> >Date: Mon, 1 Jul 2002 02:04:48 +0900 (JST)
> >
> >I am facing a difficult question now, I have to
> make a
> >network for one company that transmit the NetBIOS
> through
> >internet. You know I am a fresh man. I know
> somebody give
> >me a idea.
> >If you have the experience of that and could
> provide me a
> >configuration sample, it is very great.
> >
> >Thanks alot
> >Tom
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:16 GMT-3