From: CTAlex405c@xxxxxxx
Date: Mon Jul 01 2002 - 11:49:12 GMT-3
I have a Cisco 4000 which had 11.2 on it and with the given memory, I loaded th
e 11.3 image. After the 4000 came back up it had r4(boot)> prompt. Since I ha
d never had a probem before of loading images I did not save a copy of the old
image :-( I tried loading 11.2 which I downloaded from the Cisco web site, but
I could not get the boot prompt to go away. Below is the show hardware.
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-BOOT-M), Version 11.1(7), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Wed 23-Oct-96 22:37 by tej
Image text-base: 0x600088A0, data-base: 0x602A0000
cisco 4500 (R4K) processor (revision E) with 16384K/8192K bytes of memory.
Processor board ID 06454432
R4700 processor, Implementation 33, Revision 1.0
G.703/E1 software, Version 1.0.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
2 Ethernet/IEEE 802.3 interfaces.
4 Serial network interfaces.
128K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
4096K bytes of processor board Boot flash (Read/Write)
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:16 GMT-3