From: Alexander Kharkats (akharkats@xxxxxxxxxxxx)
Date: Sat Jun 29 2002 - 15:34:29 GMT-3
I think you have to use ppp multilink. Load-threshold command just specifies
when to activate a second channel.
If somebody's seen otherwise, please advise.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Carlos G Mendioroz
Sent: Saturday, June 29, 2002 10:59 AM
To: Groupstudy ccielab list
Subject: ISDN & ppp multilink things...
Hi,
just going over ISDN things, some I have not been able to clarify:
-using load-threshold, you can bring 2 (or more?) B channels into
a link using ppp but without ppp multilink. What's the protocol used
then ?
-when MPP is used, a virtual-access interface is created and the info on
seconds left and seconds idle from "show isdn active" vanishes...
How do you see that info ?
TIA,
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:44 GMT-3