From: Richard Foltz (ccie2b@xxxxxxxxxx)
Date: Fri Jun 28 2002 - 23:01:19 GMT-3
ip address negotiated?
Richard Foltz, CCIE#8339
----- Original Message -----
From: "Jason Cash" <cash2001@swbell.net>
To: <ccielab@groupstudy.com>
Sent: Friday, June 28, 2002 7:41 PM
Subject: dsl with Cisco 4500
> I currently have a 4500 with two eth. Ports and was wanting to know if
> there was a way to configure the device to obtain an IP from my ISP
> dynamically? Below is the 'sh ver''. Any comments are appreciated as I
> am a little confused.
>
> fs#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 4500 Software (C4500-JS-M), Version 12.1(15), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Mon 13-May-02 18:42 by kellythw
> Image text-base: 0x60008958, data-base: 0x60FD0000
>
> ROM: System Bootstrap, Version 5.2(7b) [mkamson 7b], RELEASE SOFTWARE
> (fc1)
> BOOTLDR: 4500 Bootstrap Software (C4500-BOOT-M), Version 10.3(7),
> RELEASE SOFTWARE (f
> c1)
>
> fs uptime is 24 minutes
> System returned to ROM by power-on
> System image file is "flash:c4500-js-mz.121-15.bin"
>
> cisco 4500 (R4K) processor (revision B) with 32768K/8192K bytes of
> memory.
> Processor board ID 03771215
> R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
> G.703/E1 software, Version 1.0.
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> TN3270 Emulation software.
> 2 Ethernet/IEEE 802.3 interface(s)
> 4 Serial network interface(s)
> 128K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash partition 1 (Read/Write)
> 8192K bytes of processor board System flash partition 2 (Read/Write)
> 4096K bytes of processor board Boot flash (Read/Write)
>
> Configuration register is 0x2102
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:43 GMT-3