From: Curtis Phillips (cphillips@xxxxxxxxxx)
Date: Thu Jun 27 2002 - 12:23:59 GMT-3
Two seperate BRFs require a layer three device external to the 3920 to
communicate.
It would be the equivalent of communicating between two seperate VLANs on a
Cat 5000.
Curtis
----- Original Message -----
From: "yakout esmat" <yesmat@iprimus.com.au>
To: "David Luu" <wicked01@ix.netcom.com>; "Groupstudy"
<ccielab@groupstudy.com>
Sent: Thursday, June 27, 2002 5:03 AM
Subject: RE: Two TrBrfs on TR 3920
> I know that, but that's not what I meant.
>
> If in the exam or in any scenario the question is asking specifically to
> configure two TrCrfs and two TrBrfs and assign one TrCrf to first Brf and
> the other Crf to the other Brf.
>
> How can we get the two Crf's to talk to each other through two different
> Brfs.
>
> Thanks
>
> Yak
>
> -----Original Message-----
> From: David Luu [mailto:wicked01@ix.netcom.com]
> Sent: Thursday, June 27, 2002 6:40 PM
> To: yakout esmat; Groupstudy
> Subject: Re: Two TrBrfs on TR 3920
>
>
> create 4 vlan id's, associate the TrCRF with the appropiate TrBRF, and
> assign ports
>
> At 05:48 PM 6/27/2002 +1000, yakout esmat wrote:
> >Hi all,
> >
> >I have a doubt about Token switch configs.
> >
> >I know that having two TrCrfs to the same TrBrf is ok and they can talk.
> But
> >what we need to do extra if we are configuring one TrCrf1 to parent
TrBrf1
> >and another TrCrf2 to different parent TrBr2. i.e having two configured
> >TrBrfs on the switch
> >
> >Thanks
> >
> >Yak
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:42 GMT-3