From: li jian hua (jasonli@xxxxxxxxx)
Date: Mon Jun 24 2002 - 11:16:31 GMT-3
HI Irene,
Because I now am out off my lab device,i can not test it.
Would you please tell us how you test?
r8--------------r7
To change r8's hold timer,what do you type at r7?
rgds
jason
At 13:00 2002-6-24 +0200, GOLBERY Irhne wrote:
>Just tested it
>It works
>Thanks
>
>Irene
>
>-----Message d'origine-----
>De : steven.j.nelson@bt.com [mailto:steven.j.nelson@bt.com]
>Envoyi : lundi 24 juin 2002 11:42
>@ : GOLBERY Irhne; p_chopin@yahoo.com; ccielab@groupstudy.com
>Objet : RE: IPX eigrp hello-interval commnd
>
>
>Irene
>
>Correct, but.....
>
>If you are asked to change the hold time on R8 for example without using the
>command "hold timer" then you can change it on the directly attached
>neighbor and this will automatically be reflected on R8 without using the
>command.
>
>Good eh ?
>
>HTH
>
>Steve
>
>-----Original Message-----
>From: GOLBERY Irhne [mailto:irene.golbery@arche.fr]
>Sent: 24 June 2002 09:45
>To: 'Paul'; ccielab@groupstudy.com
>Subject: RE: IPX eigrp hello-interval commnd
>
>
>I have had a look on the cisco web :
>
>
>http://www.cisco.com/warp/public/103/eigrp1.html
>
>Note that if you change the hello interval, the hold time is not
>automatically adjusted to account for this change - you must manually adjust
>the hold time to reflect the configured hello interval.
>
>Then it seems the only way to change the holdtime is to use "ipx eigrp hold
>time" cmd
>
>Need some other feed back.
>
>Thanks
>
>Irene.
>
>-----Message d'origine-----
>De : Paul [mailto:p_chopin@yahoo.com]
>Envoyi : jeudi 20 juin 2002 06:43
>@ : ccielab@groupstudy.com
>Objet : IPX eigrp hello-interval commnd
>
>
>Hi group,
>I've been playing recently with ipx eigrp. It is said
>on Cisco web site, that hold-time is 3 times
>hello-interval,and if hold-time is less than 2 tims
>hello-interval it resets. It seems to me, dosen't
>matter what value I put for hello-interval , hold-time
>stays the same.
>Can someboy explain this please?Does it require
>another
>command in order to work?
>Paul
>
>
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:40 GMT-3