From: li jian hua (jasonli@xxxxxxxxx)
Date: Sun Jun 23 2002 - 23:02:59 GMT-3
HI David,
We all know dlsw command should use non-canonical address.
The Ethernet address is canonical,so we must change it to non-canonical
when using it by the dlsw command.
You say the book is right,please give a reason for it,or else you will
mislead a lot of people in the group.
rgds
jason
At 14:30 2002-6-23 -0700, David Luu wrote:
>the book is correct...the dlsw icanreach mac-address does what it says, it
>can REACH the defined mac-address
>
>At 10:08 PM 6/23/2002 +0800, li jian hua wrote:
>>HI ALL,
>>At the page 934 of the book CCIE Practical studies,there is a configuration:
>>dlsw icanreach mac-address 3745.1000.1010 mask ffff.ffff.ffff
>>dlsw bridge-group 1
>>
>>I think "mac-address 3745.1000.1010" should be written as "mac-address
>>eca2.0800.0808"
>>Because the mac-address 3745.1000.1010 is a pc under the e0 interface of
>>the router.
>>Here 3745.1000.1010 is an Ethernet MAC address.
>>
>>router(e0)------------pc(3745.1000.1010 0)
>>
>>please help.
>>rgds
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:40 GMT-3