Re: about dlsw icanreach command

From: David Luu (wicked01@xxxxxxxxxxxxx)
Date: Sun Jun 23 2002 - 18:30:29 GMT-3

• Next message: duan: "dlsw circuit-weight & fault tolerant"
• Previous message: Treptow, Georg: "Redistribution from OSPF to IGRP"
• Maybe in reply to: li jian hua: "about dlsw icanreach command"
• Next in thread: Katson PN Yeung: "Re: about dlsw icanreach command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
the book is correct...the dlsw icanreach mac-address does what it says, it
can REACH the defined mac-address

At 10:08 PM 6/23/2002 +0800, li jian hua wrote:
>HI ALL,
>At the page 934 of the book CCIE Practical studies,there is a configuration:
>dlsw icanreach mac-address 3745.1000.1010 mask ffff.ffff.ffff
>dlsw bridge-group 1
>
>I think "mac-address 3745.1000.1010" should be written as "mac-address
>eca2.0800.0808"
>Because the mac-address 3745.1000.1010 is a pc under the e0 interface of
>the router.
>Here 3745.1000.1010 is an Ethernet MAC address.
>
>router(e0)------------pc(3745.1000.1010 0)
>
>please help.
>rgds

• Next message: duan: "dlsw circuit-weight & fault tolerant"
• Previous message: Treptow, Georg: "Redistribution from OSPF to IGRP"
• Maybe in reply to: li jian hua: "about dlsw icanreach command"
• Next in thread: Katson PN Yeung: "Re: about dlsw icanreach command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:40 GMT-3