From: Treptow, Georg (gxtrept@xxxxxxxxx)
Date: Sat Jun 22 2002 - 18:30:52 GMT-3
That would depend on the requirements. is it a point-to-point or multipoint
circuit. Physical interfaces do not like the interface DLCI command and you
will have to use mapping. At least that is what i noticed with my lab here
in Minneapolis. I might be wrong...
Georg
-----Original Message-----
From: Lance [mailto:Lance@advnetech.com]
Sent: Saturday, June 22, 2002 4:01 PM
To: ccielab@groupstudy.com
Subject: Frame maps and Interface-dlci
If you have a point-to-point frame connections between two routers should
you
use the frame map or the interface-dlci command?
>From the perspecitve of the lab is one correct and the other wrong? I know
that they both work, however there has been some discussion on the what
consitutes a correct configuration.
Thanks
Lance
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:40 GMT-3