From: Ali Fahmi (afahmi@xxxxxxxxx)
Date: Sat Jun 22 2002 - 04:15:39 GMT-3
Hi All,
I need confirmation about behaviour of IPX over ISDN,
I have scenario like this,
net-60 (router A
=======F/R=========Router B (Net 20
||
||
======
ISDN=========
I have filtered RIP , SAPs and Serialization to prevent BRI
Int. bring up,
All Serial Interface is running EIGRP, All Ethernet and BRI
Interface is running RIP,
I created ipx route static in every router to reach
ethernet of each other router.
I disconnected the serial int, and cleared up the ipx
route,
all ipx entries were gone except static,
when I tried to ping from Router A to network 60 on router
B, the BRI int was bring up, and connected to the router B
and got reply.
I try to sho ipx route,
I saw ipx network 60 in routing table of Router A with "R"
flag ( it means got update from RIP via BRI),
Is this normal behaviour, when BRI interface is UP, RIP
will send update routing each other router ?? even RIP has
been filtered ???
I dont know whether it;s proper behaviour or not,
Anybody can explain me about this ? thanks,
This is my filter list,
access-list 900 deny -1 FFFFFFFF 0 FFFFFFFF 452
access-list 900 deny -1 FFFFFFFF 0 FFFFFFFF 453
access-list 900 deny -1 FFFFFFFF 0 FFFFFFFF 457
access-list 900 permit -1
dialer-list 1 protocol ipx list 900
dialer-list 1
Rgds,
Ali Fahmi
----------------- Kemudahan Hosting PlasaCom -------------------------------
Hosting menjadi lebih mudah dan murah dengan keringanan 50% biaya registrasi ma
il hosting dan webhosting selama bulan Juni 2002. Klik http://idc.plasa.com unt
uk pendaftaran
-------------------------------------------------------------------------------
--------
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:40 GMT-3