From: Jeff Horton (JHorton@xxxxxxxxxxxxxxxx)
Date: Wed Jun 19 2002 - 22:43:27 GMT-3
Thanks! The bgp redistribute internal command worked. I thought I had seen
that command somewhere but frankly I have never used it. Who knows what kind
of bizarre requirements there might be on the lab though! Prior to putting
the command in I could only see ebgp-generated routes because I had bgp
route-reflectors configured and ibgp routes.
Jeff
-----Original Message-----
From: Lupi, Guy [mailto:Guy.Lupi@eurekaggn.com]
Sent: Wednesday, June 19, 2002 8:08 PM
To: 'Jeff Horton '; 'Ccielab (E-mail) '
Subject: RE: Redistributing BGP into OSPF
If you are trying to redistribute a route learned via IBGP,
you have to go
into your bgp configuration on the router that is doing the
redistribution
and enter the "bgp redistribute-internal" commmand. Until
this is put in,
the router will not redistribute ibgp routes into an IGP.
Guy
-----Original Message-----
From: Jeff Horton
To: Ccielab (E-mail)
Sent: 6/19/2002 6:30 PM
Subject: Redistributing BGP into OSPF
Hello folks,
I have been fighting a problem redistributing BGP into OSPF.
Any special
"gotchas" I might be missing? All other redistributions seem
fine.
Thanks,
Jeff
Jeff Horton
Sr. Solutions Consultant
Computer Tech
336-662-9192(v)
336-662-9798(f)
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:38 GMT-3