From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Wed Jun 19 2002 - 22:19:45 GMT-3
Guys,
An interesting issue I have come up with - on a 8500 series router you
cannot assign pim to BVI interfaces. Yet on other routers you can. Is this
code dependant or is this poor design? The reason I ask is that I am
configuring multicast support across a campus with 5500 and 8540's. I use
VLAN's. Hence I need to apply PIM to the BVI's - yet you cannot do this.
Have I missed something or is this just no doable?
This also makes for an interesting lab topic - multicast with BVI's!!!
Regards,
Jason Sinclair CCIE #9100
Manager, Network Control Centre
POWERTEL
55 Clarence Street,
SYDNEY NSW 2000
AUSTRALIA
office: + 61 2 8264 3820
mobile: + 61 416 105 858
email: sinclairj@powertel.com.au
**********************************************************************
PowerTel Limited, winners of
Broadband Wholesale Carrier of the year, CommsWorld Telecomms Awards 2001
Best Emerging Telco, Australian Telecom Awards 2001
**********************************************************************
This email (including all attachments) is intended solely for the named
addressee. It is confidential and may contain commercially sensitive
information. If you receive it in error, please let us know by reply email,
delete it from your system and destroy any copies.
This email is also subject to copyright. No part of it should be reproduced,
adapted or transmitted without the prior written consent of the copyright owner
.
Emails may be interfered with, may contain computer viruses or other defects
and may not be successfully replicated on other systems. We give no
warranties in relation to these matters. If you have any doubts about
the authenticity of an email purportedly sent by us, please contact us
immediately.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:38 GMT-3