From: Paglia, John (USPC.PCT.Hopewell) (JPaglia@xxxxxxxxxxxxx)
Date: Wed Jun 19 2002 - 21:55:54 GMT-3
Georg is correct. Manual configuration on every router is necessary is
sparse mode.
Pags
> -----Original Message-----
> From: Treptow, Georg [SMTP:gxtrept@qwest.com]
> Sent: Wednesday, June 19, 2002 8:40 PM
> To: 'George Spahl'; ccielab@groupstudy.com
> Subject: RE: Multicasting - Sparse Mode Static RP
>
> As far as I know you will have to use the rp-address command for Sparse
> Mode.
>
> Georg
>
> -----Original Message-----
> From: George Spahl [mailto:g.spahl@insightbb.com]
> Sent: Wednesday, June 19, 2002 4:44 PM
> To: ccielab@groupstudy.com
> Subject: Multicasting - Sparse Mode Static RP
>
>
> Greetings,
>
> When you're manually configuring the RP in a Sparse Mode network do you
> need to manually configure the RP address on the RP itself as well as
> all the other routers? It seems to me that this is actually the case
> but one of my books says it's not necessary. Anyone?
>
> Thanks,
>
> George
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:38 GMT-3