From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Wed Jun 19 2002 - 04:01:05 GMT-3
Jason,
What you are doing here is telling the switch that it doesn't need to
resolve the MAC via arp. The switch uses the port that sees that MAC and
hence associates it with the VLAN of that port. What I think you are after
is set cam where you can specify the vlan, mod/port, etc....
Cheers,
Jason Sinclair CCIE #9100
Manager, Network Control Centre
POWERTEL
55 Clarence Street,
SYDNEY NSW 2000
AUSTRALIA
office: + 61 2 8264 3820
mobile: + 61 416 105 858
email: sinclairj@powertel.com.au
-----Original Message-----
From: li jian hua [mailto:jasonli@cisco.com]
Sent: Wednesday, 19 June 2002 15:53
To: ccielab@groupstudy.com
Subject: about set arp on C5K
HI ALL,
At 5k,i use the following command:
set arp p 200.200.200.1 14-14-14-14-14-14
My question is that how let the command to relate with a vlan ID?such as
vlan 100.
RGDS
jason
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:37 GMT-3