From: Ouellette, Tim (tim.ouellette@xxxxxxx)
Date: Wed Jun 19 2002 - 00:41:01 GMT-3
Just through the "no keepalive" under the ethernet interface and the
interface will be up/up I believe even without a cable plugged in. Good
trick to know
TIm
-----Original Message-----
From: Jason Cash [mailto:cash2001@swbell.net]
Sent: Tuesday, June 18, 2002 10:47 PM
To: ccielab@groupstudy.com
Subject: Ethernet loopback plug?
I am doing the CC bootcamp labs and I am running into a problem. On the
first lab, four routers are involved; several of which the Ethernet
interfaces are connected to separate broadcast domains. Now I only have
2 machines currently and let's say there are 5 separate broadcast
domains. Is there a plug/cable/adapter I can use to bring the Ethernet
interfaces up/up instead of connecting them to several separate machine
(of which I don't have?).
I also realize I can connect them to a hub, but I may run out of ports.
Just curious!
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:37 GMT-3