From: p729@xxxxxxx
Date: Tue Jun 18 2002 - 22:56:08 GMT-3
5.4.x? Hmmm...even my ole 2901 hamstrung at 4.x was able to change the native V
LAN, and I figured if that old thing could do it...Ah, a quick check of the 3.x
'show trunk' command doesn't show the native VLAN, but the 4.x command does.
Would you settle for 4.x?
Regards,
Mas Kato
https://ecardfile.com/id/mkato
============================================================
From: "Balaji Siva" <bsivasub@cisco.com>
Date: 2002/06/18 Tue PM 08:34:06 EDT
To: <p729@cox.net>, "Darek Kuzma" <darekk@optonline.net>,
<ccielab@groupstudy.com>
Subject: RE: removing vlan 1 on Cat 5000
vlan 1 can be removed from trunk. you need software 5.4.x or above.
and ofcourse you can set whatever vlan as native vlan on a dot1q or ISL
trunk and clear vlan 1 if running 5.4.x or above
regards
B
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
p729@cox.net
Sent: Tuesday, June 18, 2002 8:14 PM
To: Darek Kuzma; ccielab@groupstudy.com
Subject: Re: removing vlan 1 on Cat 5000
Yes. You need to set the native VLAN for the trunk to something other than 1
first.
Yes.
None that I know of.
Regards,
Mas Kato
https://ecardfile.com/id/mkato
============================================================
From: Darek Kuzma <darekk@optonline.net>
Date: 2002/06/18 Tue PM 01:45:23 EDT
To: ccielab@groupstudy.com
Subject: removing vlan 1 on Cat 5000
Hi,
3 quick questions:
Is it possible to clear vlan 1 from trunk on Cat 5000?
If yes - can it be done for both isl and dot1q?
Are there any ios restrictions?
Thanks
Darek Kuzma
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:37 GMT-3