From: Chris Hugo (chrishugo@xxxxxxxxx)
Date: Tue Jun 18 2002 - 17:23:17 GMT-3
Hi,
Don't forget to add your dialer string in your dialer map command.
This URL will help you out
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_r
/drfd.htm#xtocid24
hth,
chris hugo
Dang Quang Minh <minhdq@saigonctt.com> wrote: Hi
Try debug ppp nego and debug ppp auth and let me know the output.
U can also try debug isdn q921 and debug isdn q931 to verify the status
of ISDN.
Regards
Minh
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ali Fahmi
Sent: Tuesday, June 18, 2002 7:59 AM
To: ccielab@groupstudy.com
Subject: encap. failed on ISDN
hi All,
I have 2 routers connected via ISDN,
Router A
Int bri0
ip add 150.50.2.2 255.255.255.0
encapsulation ppp
dialer map ip 150.50.2.3 name R3 broadcast 2000
dialer-group 1
isdn switch-type basic-ni
isdn spid1 11110101
dialer-list 1 protocol ip permit
Router B
Int Bri0
ip add 150.50.2.3 255.255.255.0
encapsulation ppp
dialer map ip 150.50.2.2 name R2 broadcast
dialer-group
isdn switch-type basic0ni
isdn spid1 22220101
dialer-list 1 protocol ip permit
-----
The problem is, when I ping from Router A to B , the Bri0
can bring up and connected
properly but ping is not successfull,
I tried to debug ip packet on router B and found
"encapsulation failed"
but if I put string on router B (dialer map 150.50.2.2 name
R2 broadcast 1000)
ping is successfull,
anybody know what is suspected problem ?
thx
Ali fahmi
----------------- Kemudahan Hosting PlasaCom
-------------------------------
Hosting menjadi lebih mudah dan murah dengan keringanan 50% biaya
registrasi mail hosting dan webhosting selama bulan Juni 2002. Klik
http://idc.plasa.com untuk pendaftaran
------------------------------------------------------------------------
---------------
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:37 GMT-3