From: Craig Elrod (celrod@xxxxxxxxx)
Date: Tue Jun 18 2002 - 13:02:11 GMT-3
The following in my network. Attached are config files and sh
commands. The DLSW peer's connect ok, but the netbios traffic never
propagates, and the 'show dlsw reach' is empty. I also noticed that with
'show source' the TCP Peername not set message. Is this the problem. I
thought DLSW+ was to allow connect without peernames, especially over token
ring.
Thank you kindly for your help,
-Craig.
[Win 2000 PC] netbios
|
(tokenring 200, Brdg 2)
R6
/\
/ \
frame / \ ethernet
/ \
R4 R2
\ /
\ /
\ /
(tokenring 100, brdg 14)
|
[Win 95 pc] netbios
ex:
end
r6#sh dl pe
Peers: state pkts_rx pkts_tx type drops ckts
TCP uptime
TCP 135.2.24.4 CONNECT 97 97 conf 0 0 0
00:47:31
TCP 135.2.24.2 CONNECT 96 96 conf 0 0 0
00:47:16
Total number of connected peers: 2
Total number of connections: 2
r6#
r6#sh sour
Local Interfaces: receive transmit
srn bn trn r p s n max hops cnt cnt drops
To1/1/0 200 14 999 * b 7 7 7 18 0 14
Global RSRB Parameters:
TCP Queue Length maximum: 100
Ring Group 999:
No TCP peername set, TCP transport disabled
Maximum output TCP queue length, per peer: 100
Rings:
bn: 14 rn: 200 local ma: 400b.3d1e.1f14 TokenRing1/1/0 fwd: 0
Explorers: ------- input ------- ------- output -------
spanning all-rings total spanning all-rings total
To1/1/0 0 3 3 0 0 0
Explorer fastswitching enabled
Local switched: 17 flushed 0 max Bps 38400
rings inputs bursts throttles output drops
To1/1/0 17 0 0 0
r6#
[GroupStudy.com removed an attachment of type application/zip which had a name
of dlsw+.zip"; x-mac-type="705A4950"; x-mac-creator="705A4950]
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:37 GMT-3