SPID

From: eric ong (ongyongk@xxxxxxxxx)
Date: Tue Jun 18 2002 - 00:01:06 GMT-3

• Next message: Lance: "OSPF Demand Circuit issues"
• Previous message: Tim Ross: "Re: Changes of lab=loss of $$"
• Next in thread: Ahmed Mamoor Amimi: "Re: SPID"
• Maybe reply: Ahmed Mamoor Amimi: "Re: SPID"
• Maybe reply: Sahibzada Baleeghuddin Afridi: "RE: SPID"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
>From the 'isdn spid1' usage guideline:

"The ISDN switch checks for the LDN to determine whether both channels can
be used to transmit and receive data. If there is not an LDN present, then
only the B1 channel can be used for full-duplex communication. However,
the B2 channel can still be used to make outgoing calls."

Is the above referring only to the case where 2 SPIDs & 2 DNs are given?

If given a basic-5ess and only 1 SPID (eg. 12345), which is also the DN,
how should the SPIDs be configured for both channels to be used for
full-duplex comms, eg. ppp multilink will bring up the 2nd channel when
load threshold exceeded?

1. isdn spid1 12345

2. isdn spid1 12345 12345

3. isdn spid1 12345
   isdn spid1 12345

4. isdn spid1 12345 12345
   isdn spid2 12345 12345

i've read thru Cisco docs and the archives here, couldn't find anything,
thanks.

eric

• Next message: Lance: "OSPF Demand Circuit issues"
• Previous message: Tim Ross: "Re: Changes of lab=loss of $$"
• Next in thread: Ahmed Mamoor Amimi: "Re: SPID"
• Maybe reply: Ahmed Mamoor Amimi: "Re: SPID"
• Maybe reply: Sahibzada Baleeghuddin Afridi: "RE: SPID"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:36 GMT-3