From: David Ham (ccieau@xxxxxxxxxxx)
Date: Mon Jun 17 2002 - 07:40:09 GMT-3
Arul,
try this
ipx router nlsp
distribute-list 800 in
access-list 800 deny EEE
access-list permit -1
this will block the IPX EEE network sending out to other end.
Regard,
David Ham
>From: "atul pawar" <atulpawar@hotmail.com>
>To: ccieau@hotmail.com, ccielab@groupstudy.com
>Subject: Re: NLSP , RIP and route filtering help....SOlved
>Date: Mon, 17 Jun 2002 08:11:39 +0000
>
>Hi David
>For me even the IN is not working. But I have got this working by filtering
>that network in the rip process of r3. I
>Following is my config for r3
>r3
>!
>!
>ipx router rip
>distribute-list 800 in Ethernet0/0
>!
>access-list 800 deny EEE
>access-list 800 permit FFFFFFFF
>!
>
>r1#
>r1#sh ipx rout
>Codes: C - Connected primary network, c - Connected secondary n
> S - Static, F - Floating static, L - Local (internal), W -
> R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
> s - seconds, u - uses, U - Per-user static/Unknown, H - Hol
>
>5 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.
>
>No default route known.
>
>L 1111 is the internal network
>C BBB (NOVELL-ETHER), Et0
>N DDD [45][10/01] via 3333.0000.0000.0001, 125s, Se0
>N 1234 [45][10/01] via 3333.0000.0000.0001, 125s, Se0
>N 3333 [45][11/01] via 3333.0000.0000.0001, 125s, Se0
>
>
>cheers
>Atul
>
>
>
>
>
>
>>From: "David Ham" <ccieau@hotmail.com>
>>Reply-To: "David Ham" <ccieau@hotmail.com>
>>To: atulpawar@hotmail.com, ccielab@groupstudy.com
>>Subject: Re: NLSP , RIP and route filtering help
>>Date: Mon, 17 Jun 2002 15:38:01 +1000
>>
>>Atul,
>>
>>Well I had the same problem.
>>It seems like at NLSP only distribute-list in keyword works.
>>
>>I tried distribute-list out interface/RP but doesn't work.
>>
>>It is difficult to understand how IN keyword can block the ipx routes
>>going
>>out of the router. -- anyone has idea?
>>
>>Cheers,
>>
>>David Ham
>>
>>
>>>From: "atul pawar" <atulpawar@hotmail.com>
>>>Reply-To: "atul pawar" <atulpawar@hotmail.com>
>>>To: ccielab@groupstudy.com
>>>Subject: NLSP , RIP and route filtering help
>>>Date: Sun, 16 Jun 2002 17:31:28 +0000
>>>
>>>Hi guyes
>>>
>>>I'm not able to filter routes flowing from IPX RIP into NLSP
>>>
>>>r1----NLSP-----r3----IPX RIP---R5(Netwrok eee)
>>>
>>>
>>>
>>>
>>>r1 is seeing network eee via NLSP.
>>>
>>>r1#sh ipx route
>>>
>>>L 1111 is the internal network
>>>C BBB (NOVELL-ETHER), Et0
>>>N DDD [45][10/01] via 3333.0000.0000.0001, 4s, Se0
>>>NX EEE [45][12/02][02/01] via 3333.0000.0000.0001, 4s, Se0
>>>N 1234 [45][10/01] via 3333.0000.0000.0001, 4s, Se0
>>>N 3333 [45][11/01] via 3333.0000.0000.0001, 4s, Se0
>>>
>>>
>>>Following is the config of r3 where Im trying to filter this network
>>>
>>>
>>>!
>>>ipx routing 0004.dd69.9f41
>>>ipx internal-network 3333
>>>!
>>>access-list 800 deny EEE
>>>access-list 800 permit FFFFFFFF
>>>
>>>!
>>>!
>>>ipx router nlsp
>>>area-address 0 0
>>>distribute-list 800 out rip
>>>
>>>
>>>r3# sh ipx route
>>>
>>>No default route known.
>>>
>>>L 3333 is the internal network
>>>C DDD (NOVELL-ETHER), Et0/0
>>>C 1234 (UNKNOWN), Lo99
>>>N BBB [45][10/01] via 1111.0000.0000.0001, 251s, Se2/1
>>>R EEE [02/01] via DDD.0004.dd69.a300, 14s, Et0/0
>>>N 1111 [45][11/01] via 1111.0000.0000.0001, 251s, Se2/1
>>>
>>>
>>>Am I missing anything?
>>>Atul
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Atul
>>>
>>>
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:34 GMT-3