From: Michael Popovich (m.popovich@xxxxxxxxx)
Date: Sun Jun 16 2002 - 19:39:17 GMT-3
The normal RSVP setup is needed through the DLSW path.
MP
----- Original Message -----
From: "Michael Popovich" <m.popovich@mchsi.com>
To: "CCIE GROUPSTUDY" <ccielab@groupstudy.com>
Sent: Sunday, June 16, 2002 5:12 PM
Subject: DLSW+ RSVP
> Here is the solution provided by the Doc CD to set this up.
>
> It mentions nothing about setting up RSVP on the IP router in between the
DLSW
> routers, even though they are in the diagram.
>
> I would think you need RSVP setup as normal on all routers in the DLSW
path.
>
> Any comments??
>
> Here is the Doc CD link:
>
>
http://127.0.0.1:8080/cc/td/doc/product/software/ios121/121cgcr/ibm_c/bcprt2
/
> bcddlsw.htm#xtocid1133251
>
>
>
> DLSWRTR 1
>
>
>
> dlsw local-peer peer id 10.2.17.1
> dlsw remote-peer 0 tcp 10.2.24.3
> dlsw rsvp 40 10
>
>
> DLSWRTR2
>
>
>
> dlsw local-peer peer id 10.2.24.3
> dlsw remote-peer 0 tcp 10.2.17.1
> dlsw rsvp 40 10
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:34 GMT-3