From: David Luu (wicked01@xxxxxxxxxxxxx)
Date: Sun Jun 16 2002 - 17:54:12 GMT-3
try changing your distribute list to "in" instead of "out"
At 05:31 PM 6/16/2002 +0000, atul pawar wrote:
>Hi guyes
>
>I'm not able to filter routes flowing from IPX RIP into NLSP
>
>r1----NLSP-----r3----IPX RIP---R5(Netwrok eee)
>
>
>
>
>r1 is seeing network eee via NLSP.
>
>r1#sh ipx route
>
>L 1111 is the internal network
>C BBB (NOVELL-ETHER), Et0
>N DDD [45][10/01] via 3333.0000.0000.0001, 4s, Se0
>NX EEE [45][12/02][02/01] via 3333.0000.0000.0001, 4s, Se0
>N 1234 [45][10/01] via 3333.0000.0000.0001, 4s, Se0
>N 3333 [45][11/01] via 3333.0000.0000.0001, 4s, Se0
>
>
>Following is the config of r3 where Im trying to filter this network
>
>
>!
>ipx routing 0004.dd69.9f41
>ipx internal-network 3333
>!
>access-list 800 deny EEE
>access-list 800 permit FFFFFFFF
>
>!
>!
>ipx router nlsp
>area-address 0 0
>distribute-list 800 out rip
>
>
>r3# sh ipx route
>
>No default route known.
>
>L 3333 is the internal network
>C DDD (NOVELL-ETHER), Et0/0
>C 1234 (UNKNOWN), Lo99
>N BBB [45][10/01] via 1111.0000.0000.0001, 251s, Se2/1
>R EEE [02/01] via DDD.0004.dd69.a300, 14s, Et0/0
>N 1111 [45][11/01] via 1111.0000.0000.0001, 251s, Se2/1
>
>
>Am I missing anything?
>Atul
>
>
>
>
>
>
>
>
> Atul
>
>
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:34 GMT-3