From: Khurram Khani (kkhani@xxxxxxxxxxxxxxxxxx)
Date: Fri Jun 14 2002 - 20:52:58 GMT-3
Hi All,
I received below question for Generic Traffic Shaping from
a folk. Looking at below configuration.
I would say "none" of the statement is holding true as default
Serial Bandwidth without a clockrate is T1? 1.5MBPs and
the two accesslist statements are just putting 32K CIR for
host to host connection.
Any suggestion?
A. William ccie_tobe1@yahoo.com wrote
Sent: Friday, June 14, 2002 4:12 PM
Subject: GTS Question
Hi ,
Does any one would suggest an answer for this??
int serial 1/1
ip address 4.4.4.4 255.0.0.0
load-interval 30
traffic-shape group 101 32000 8000 8000
traffic-shape group 102 32000 8000 8000
.
.
access-list 101 permit ip host 1.1.1.1 host 100.0.0.2
access-list 102 permit ip host 1.1.1.1 host 100.0.0.3
whats true for above configuration?
1. Host 100.0.0.2 will have 50% of bandwidth of leased line
2. Host 100.0.0.3 will have 30% of bandwidth based upon host 100.0.0.2's
circuit utilization
3. Host 100.0.0.2 will have 50% of the bandwidth of lease line and Host
100.0.0.3 will have 30% of the bandwidth based upon host 100.0.0.2's
circuit utilization
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:33 GMT-3