From: Emmanuel Oppong (e-oppong@xxxxxxxxx)
Date: Thu Jun 13 2002 - 02:22:20 GMT-3
I must have had a space after the password. I retyped and now it works.
Thanks guys!
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Nick Shah
Sent: Wednesday, June 12, 2002 9:21 PM
To: Emmanuel Oppong; ccielab@groupstudy.com
Subject: Re: RIP v2 Authentication not working
Emmanuel,
Can you check a couple of things..
1. both the routers are running RIPV2
2. there is no space after/b4 the passwd. (cisco4)
rgds
Nick
----- Original Message -----
From: "Emmanuel Oppong" <e-oppong@attbi.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, June 13, 2002 1:19 PM
Subject: RIP v2 Authentication not working
> Hi folks,
>
> I have the following configs for authenticating routing updates between 2
> RIP v2 routers: BB2 and r4. I thought this config should work fine. But
it
> doesn't. Without the authentication I receive routes between the 2
routers.
> Debug shows that I have invalid authentication. What could be wrong. Any
> ideas?
>
>
> Router BB2:
> key chain r4
> key 1
> key-string cisco4
> !
> interface TokenRing0
> ip rip authentication mode md5
> ip rip authentication key-chain r4
> !
>
>
> Router r4:
> key chain bb2
> key 1
> key-string cisco4
> !
> interface TokenRing0
> ip rip authentication mode md5
> ip rip authentication key-chain bb2
> !
>
> BB2:
> debug ip rip events
> -----sample output----
> 06:26:23: RIP: ignored v2 packet from 204.205.5.1 (sourced from one of our
> addresses)
> 06:26:25: RIP: ignored v2 packet from 172.16.40.4 (invalid authentication)
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:32 GMT-3