From: Narvaez, Pablo (Pablo.Narvaez@xxxxxxxxxxxxx)
Date: Wed Jun 12 2002 - 21:54:07 GMT-3
Just wondering, Bc = CIR/8 * 1.5 as long as CIR is given in bytes, right? ... t
his will get the final value of Bc directly in bps, not bytes per second .... a
m I right? ... and 1.5 are 1.5 seconds since this is the "estimated RTT" in an
NBMA enviroment?
I may be wrong, if yes could you please clarify what these values are from/for
? (just trying to put this stuff clear in my mind since I just read an article
related to Policiers Vs Shapers)
Cheers,
hockito
-----Original Message-----
From: Bezverkhi, Serguei [mailto:Serguei.Bezverkhi@hp.com]
Sent: Miircoles, 12 de Junio de 2002 07:31 p.m.
To: Michael Popovich
Cc: ccielab@groupstudy.com
Subject: RE: FRTS Question
I would you put Bc = CIR / 8 * 1.5
and Be = 2 * Bc. (if Excessive burst is allowed)
HTH
Serguei
-----Original Message-----
From: Michael Popovich [mailto:m.popovich@mchsi.com]
Sent: June 12, 2002 8:06 PM
To: CCIE GROUPSTUDY
Subject: FRTS Question
If given the requirement to set the cir to 32K. How would you figure out
the correct values for the Bc and Be?
TIA
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:32 GMT-3