From: Neil G. Legada (nglegada@xxxxxxxxxxx)
Date: Tue Jun 11 2002 - 22:41:19 GMT-3
Hi,
This is the part# that I mentioned that could only give me 16MB of memory.
The IOS we're trying to load requires 32MB .... 16MB didnt work .... For
weeks now, TAC hasn't gave me the recommended part yet.
Thanks,
Neil
----- Original Message -----
From: "CERTWORTH" <ccie@certworth.com>
To: "Neil G. Legada" <nglegada@hotmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, June 11, 2002 10:23 PM
Subject: Re: DRAM on 7500 FEIP2 module
> Hey Neil.
>
> Having spent nights on the 7xxx, I know what you are talking about...
>
> Here is your part number: VIP2-10/15/FE2-UPG
>
> Here is the URL that would validate my point:
>
http://www.cisco.com/warp/public/cc/pd/ifaa/ifpz/fsetifpz/prodlit/908_pp.htm
>
>
> Smile :-)
>
>
> ----- Original Message -----
> From: "Neil G. Legada" <nglegada@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, June 11, 2002 7:06 AM
> Subject: OT: DRAM on 7500 FEIP2 module
>
>
> > Hello Group,
> >
> > Anybody got any idea what is the recommended part# to upgrade a
> CX-FEIP2-2TX
> > module to 32MB DRAM. The most I can get from the CCO is 16MB only. We
ran
> > into a problem when we upgraded the IOS on 7505 to 12.2(4T) codes. The
> > router failed to properly detect the FEIP2 module. We found out it would
> > require 32MB on FEIP2 to boot properly with the new IOS version. One
> problem
> > is that this module is already EOS and upgrading to FEIP2-DSW might not
be
> > cost effective. I tried on a test bed, 2x 16MB SIMM's (70ns) from 2500
> > routers and the 7505 were able to detect the module, but TAC said it is
> not
> > a recommended part and advised against of using it.
> >
> > Somebody from this group came across this problem and solution ???
> >
> > Appreciate any feedback.
> >
> >
> > Thanks and best regards,
> > Neil #8576
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:31 GMT-3