From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Tue Jun 11 2002 - 21:16:03 GMT-3
1) Static redistribution seems to be the only way (unless there are other
routing prots. where you could summarize it and inject it back, but if its
connected route, I doubt it can be done)
2) Disable eigrp/igrp redistribution, create summary of eigrp routes,
manually inject those summaries..
Since you havent presented an actual scenario, this is best I could come up
with.
rgds
Nick
----- Original Message -----
From: Thomas Larus <tlarus@cox.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, June 12, 2002 8:17 AM
Subject: The old problem of getting /32 loopbacks with class b addresses
into IGRP as /24 and then advertised out of IGRP elsewhere
> 1 )Does anyone have a quick and dirty approach to getting those pesky
class
> b IGRP /32 loopbacks into IGRP as /24 routes.
>
> I have searched my personal archives of groupstudy; I cannot get searches
of
> the groupstudy archives to work very often. I just tried. What I found
in
> my personal archives more than once is an article from Cisco that
discusses
> the problem. I did not see a solution in it, though.
>
> If you are thinking of posting this Cisco article
> http://www.cisco.com/warp/public/105/54.html,
> please don't. I just looked at this again, and followed a link or two to
> other Cisco items.
>
> 2 ) Also, is there any way to summarize an EIGRP route into IGRP (same AS
> number) ON THE SAME ROUTER. Since EIGRP does summarization out an
> interface, I can't see how one could summarize from EIGRP to IGRP on the
> same router.
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:31 GMT-3