From: Erhan Kurt (kurt@xxxxxxxxxxxxxxx)
Date: Mon Jun 10 2002 - 10:28:57 GMT-3
Tom,
On R3, Use per-destination load balance via static routes toward R1 and R2.
On R1&R2, Use MED for other networks in AS#1.
Cheers,
Erhan
-----Original Message-----
From: Tom Young [mailto:gitsyoung@yahoo.co.jp]
Sent: 10 Haziran 2002 Pazartesi 16:25
To: Erhan Kurt
Cc: ccielab@groupstudy.com
Subject: RE: BGP's load blance
Erhan:
Thank you for your reply, but I couldn't understand it,
for example, if I have two routers r1 and r2 that belongs
two diffrence AS, I could use the loopback ip address make
them load blance. But if I have a r1, r2 in AS1, r3 in AS2
, how can I make the load blance between r1&r3 and r2&r3?
Never give up
Thanks
--- Erhan Kurt <kurt@superonline.net> $B$+$i$N%a%C%;!<%8(J $B!'(J
>
> In BPG, Static routes make per-packet (CPU) or per-destination (CEF)
> load-balancing. That means that the links must be on
> the same router. So,
> you may only use MED (inbound) and LPREF (outbound)
> if your links toward the
> same AS are on different routers. If you have
> different AS's, use PREP for
> inbound traffic.
>
>
> Never Give Up,
> Erhan
>
>
> -----Original Message-----
> From: Tom Young [mailto:gitsyoung@yahoo.co.jp]
> Sent: 07 Haziran 2002 Cuma 05:45
> To: ccielab@groupstudy.com
> Subject: BGP's load blance
>
>
> Hi, group:
>
> I know if my router has two serial port , and run
> bgp,
> I could use the loopback address and multihop
> ,static
> routing for load blance with other bgp.
> May I do it in two routers? If they are in one
> bgp AS?
> Can I use their serial port for load blance with
> other
> bgp's router?
>
> Thanks alot
>
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:31 GMT-3