From: Martin, Chris (chris@xxxxxxxxxxxx)
Date: Mon Jun 10 2002 - 18:26:32 GMT-3
if you received 0% on a topic I would question if you did the topic
correctly at all or if your configs were not saved all the way and when they
went to grade it you didnt get any points. Just for future note, one of my
colleagues in my study group had San Jose retest his lab because he was
certain he did everything right, and when they came back with the recheck he
received a lower score then when he was first graded.
I would only have them retest my lab if there was a hardware failures or
other IOS issues, like memory problems etc. In that case though, they should
allot you more time and get replace the equipment...
----- Original Message -----
From: "Mikhail Dubrovskiy" <mdubrovskiy@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Monday, June 10, 2002 1:34 PM
Subject: Political question
> Hi all !
>
> I had my 3rd attempt and I failed it as usual :)
> My problem is that this time I've finished 2 hours
> before end of the day and verified whole lab a
> couple of times.
> Of cause I could make mistakes here and there but I
> was surprised to receive results were I got 0% on some
> easy topic.
>
> My question is: Does it make any sense to contact
> cisco and ask them to recheck ?
> Or in other word: Have you heard story when
> person contacted ccie program and his/her result was
> changed from fail to pass ?
>
> Thanks,
> Mike
>
>
>
> =====
> Mikhail Dubrovskiy
>
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:30 GMT-3