From: George Spahl (g.spahl@xxxxxxxxxxxxx)
Date: Mon Jun 10 2002 - 13:59:17 GMT-3
Chris,
Serguei is correct according to the literature on CCO. That is,
dialer-watch supports IGRP, EIGRP and OSPF. I can't swear to it but I
believe I have read that you can even get it to work with static routes.
George
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Martin, Chris
Sent: Monday, June 10, 2002 11:18 AM
To: Bezverkhi, Serguei
Cc: ccielab@groupstudy.com
Subject: Re: igrp question
dialer-watch doesn't work with igrp
----- Original Message -----
From: "Bezverkhi, Serguei" <Serguei.Bezverkhi@hp.com>
To: <chris@pacinter.net>
Cc: <ccielab@groupstudy.com>
Sent: Saturday, June 08, 2002 10:15 AM
Subject: RE: igrp question
Why don't you use a dialer-watch, it will do exactly what you want. It
will bring ISDN circuit up if you loose your frame relay circuit and
your *interesting traffic* list will not allow IGRP to keep ISDN up all
the time.
Dialer watch supports - IGRP, OSPF and EIGRP.
HTH
Serguei
-----Original Message-----
From: John Mistichelli [mailto:jmistichelli@yahoo.com]
Sent: June 8, 2002 12:46 PM
To: Martin, Chris; CCIE Lab Group
Subject: Re: igrp question
Hi Chris,
You want to look at snapshot routing. You can have the
link come up periodically (but infrequently) and
freeze the contents of the routing table. When the
line is up due to interesting traffic IGRP updates can
also flow.
Regards,
John
7536
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:30 GMT-3