From: Ian.C.Stong@xxxxxxxxxxxxxxx
Date: Mon Jun 10 2002 - 11:16:22 GMT-3
Did you also add a network statement for the tunnel IP network under
ospf? The basics are to create a tunnel (then make sure you can ping
each end of the tunnel), add the IP address of your tunnel under OSPF
and place it in an area - and viola.....
Ian
-----Original Message-----
From: m.popovich [mailto:m.popovich@mchsi.com]
Sent: Saturday, June 08, 2002 12:41 PM
To: ccielab
Subject: ospf over tunnel
I'm trying to get ospf to work over a tunnel. I've set the ospf network
type
to point-to-point and getting this error: %OSPF-5-ADJCHG: Process 100,
Nbr
192.168.4.4 on Tunnel0 from EXSTART to DOWN, Neighbor Down: Too many DBD
retransmitions
Has anyone seen this before?
MP
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:30 GMT-3