From: West, Jeff (westj@xxxxxxxxxxxxxx)
Date: Mon Jun 10 2002 - 10:38:54 GMT-3
True, but in this case all the routes are static. But after thinking about
it, I should have left room for keepalives. The design criteria was for
voice and a little web, there shouldn't be any default traffic.
Jeff West
TeleCommunication Systems, Inc.
(813) 831-6353 x118 Voice
-----Original Message-----
From: Tsiartas, Harrys [mailto:harrys.tsiartas@unisys.com]
Sent: Monday, June 10, 2002 9:21 AM
To: West, Jeff; 'William Wong Kun Sing'; 'Groupstudy'
Subject: RE: QoS sample configuration
Looks good,
The only thing is that it's not recommended to assign 100% of the badwith of
a link to the Congestion Management tool. Cisco recommends %75, so you have
room for administrative staff like routing updates etc.
-----Original Message-----
From: West, Jeff [mailto:westj@telecomsys.com]
Sent: Monday, June 10, 2002 7:46 AM
To: 'William Wong Kun Sing'; 'Groupstudy'
Subject: RE: QoS sample configuration
Here is a sample config:
class-map match-all VoIP-RTP
match access-group name voip <-- set up access lists to match the traffic
you need class-map match-all control
match access-group 101
class-map match-all web
match access-group name web
!
!
policy-map VoIP
class control
bandwidth percent 5
class web
bandwidth percent 20
random-detect
class VoIP-RTP
priority percent 75
class class-default
fair-queue
random-detect
Then make the multilink:
interface mulit1
bandwidth 64
ip address 10.30.10.2 255.255.255.0
encapsulation ppp
ip tcp header-compression iphc-format
no ip mroute-cache
max-reserved-bandwidth 100
service-policy output VoIP
no cdp enable
ppp multilink
ppp multilink fragment-delay 10
ppp multilink interleave
ip rtp header-compression iphc-format
Finally, apply it to your outgoing interface
Jeff West
TeleCommunication Systems, Inc.
(813) 831-6353 x118 Voice
-----Original Message-----
From: William Wong Kun Sing [mailto:wong_kunsing@solsis-eso.com.my]
Sent: Monday, June 10, 2002 7:17 AM
To: 'Groupstudy'
Subject: QoS sample configuration
Hi guys
Can somebody give me some sample configuration for the below QoS method? Let
say I want to give 50% of the bandwidth to the FTP traffic even during the
congestion.
1. LLQ
2. CBWFQ
3. WFQ
As I'm new to the QoS but I heard that there are a lots of the QoS questions
in the ccie lab. But my lab is on the next tuesday.
Please help me as soon as possible.
Thanks.
Best regards,
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:30 GMT-3