From: David Luu (wicked01@xxxxxxxxxxxxx)
Date: Sun Jun 09 2002 - 17:00:16 GMT-3
CIR should be set to the port speed of the interface, not the lower end of
the circuit
on the router with the lower end of the circuit, you set the CIR to its
port speed as well
so in Solie's example, marlin's cir would be set to 1544000 and glock's cir
to 64000
At 08:42 PM 6/9/2002 +1000, David Ham wrote:
>Hi all,
>
>Can someone verify that P366 Solie's book.
>Frame-relay cir -- set this speed to be the physical port seed of the circuit.
>Is this should be " set this speed to be the lower end of physical port
>speed of the circuit?
>
>Since Solie's book has example with one-end has 1.544 mbps and other end
>has 64k bps and used frame-relay cir 1544000.
>
>I think it should be frame-relay cir 64000.
>
>Let me know
>
>Regards,
>
>David Ham
>
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:29 GMT-3