From: Bezverkhi, Serguei (Serguei.Bezverkhi@xxxxxx)
Date: Sat Jun 08 2002 - 16:00:16 GMT-3
>From my experience with Netbeui, it is extremely chatty and it is whole
concept is built based on broadcasts. I guess the configuration that you
have tried for DLSw DDR was designed for SNA traffic.
When I did some test with DLSW I have noticed that as soon as I put on
the network a station with Netbeui enabled my poor DLSw peers just gone
bananas.
Serguei
-----Original Message-----
From: Michael Snyder [mailto:msnyder@ldd.net]
Sent: June 8, 2002 1:33 PM
To: 'Sean C.'
Cc: ccielab@groupstudy.com
Subject: RE: DLSW backup over DDR/ISDN
I've tried that config three or four times. As soon as I connect a
netbeui computer in to test it, it goes up and stays nailed.
I've determined that netbeui is evil and should never be used in a
network. <grin>
My next try I'm going to define the netbios hosts explicitly and do my
best to turn off netbios explorer packets.
Does this sound right?
Has anyone else had these problems with isdn/dlsw testing with netbeui?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sean C.
Sent: Saturday, June 08, 2002 2:52 PM
To: Treptow, Georg; ccielab@groupstudy.com
Subject: Re: DLSW backup over DDR/ISDN
Hi Georg,
I've messed around with this in a production enviroment. I had the same
question as you - Solie or CCO? I started a TAC case and their configs
pretty much matched the CCO configs. This is the link I used:
http://www.cisco.com/warp/public/697/dlswdodisdn.html
HTH,
Sean
----- Original Message -----
From: "Treptow, Georg" <gxtrept@qwest.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, June 06, 2002 11:44 AM
Subject: DLSW backup over DDR/ISDN
Hello group,
I need a little help setting up DLSW backup circuit over ISDN. I want to
avoid having the ISDN connection up for indefinite amount of time, my
understanding is that I will need to turn off keepalives at the
local-peer statement according to Solie, CCO states I need to use it at
the remote-peer statement in combination with a 5 minute timeout value.
Has anybody ever messed around with this? Which of the two is true? Can
you send me a little sample config?
Thanks a lot,
Georg Treptow
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:28 GMT-3