From: Georg Pauwen (pauwen@xxxxxxxxxxx)
Date: Sat Jun 08 2002 - 13:53:31 GMT-3
Hung,
Use the distribute-list in command on r3, or the distribute-list out command
on r2. Follow this link for a complete description of this command:
http://www.cisco.com/warp/public/105/34.html
Regards,
Georg
>From: "Hung, Sing-Yu" <Sing-Yu.Hung@pccw.com>
>Reply-To: "Hung, Sing-Yu" <Sing-Yu.Hung@pccw.com>
>To: ccielab@groupstudy.com
>Subject: RIP route distribute
>Date: Thu, 6 Jun 2002 19:56:07 +0800
>
>Dear,
>
>r1----------------rip----------(e0)r2(e1)-----------rip-----------r3
>
>R2 have loop0: 50.0.0.1/24
>r2 e0:172.16.11.1/24
>r2 e1:172.16.12.1/24
>
>If someone can tell me how to config on r2 such that r2 lo0 is only sand to
>r1 and not to r3?
>
>Bradford Hung
>
> Pacific Century CyberWorks
> Tel: 288 33125
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:28 GMT-3