RE: Frame-relay Inverse-arp

From: Brian Dennis (brian@xxxxxx)
Date: Thu Jun 06 2002 - 15:16:38 GMT-3

Next message: Rthugo1@xxxxxxx: "Re: 2511 Issue"
Previous message: Paul: "Re: (Solved)"
Maybe in reply to: Joe Jia: "Frame-relay Inverse-arp"
Next in thread: gary braver: "RE: Frame-relay Inverse-arp"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

In the real CCIE lab why would you want to rely on something dynamic and
hope it works when you can just hard code it and be sure it's going to
work?

Brian Dennis, CCIE #2210 (R&S/ISP Dial)
bdennis@5g.net
5G Networks, Inc.

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
gary braver
Sent: Thursday, June 06, 2002 10:29 AM
To: 'Erhan Kurt'; 'Joe Jia'; ccielab@groupstudy.com
Subject: RE: Frame-relay Inverse-arp

Know how to disable inarp and put in map statments. My question is why
should we disable inarp and not rely on dynamic mappings?

thanks

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Erhan Kurt
Sent: Tuesday, June 04, 2002 4:44 AM
To: Joe Jia; ccielab@groupstudy.com
Subject: RE: Frame-relay Inverse-arp

Use "no fram inv" every FR interfaces except point-to-point. i.e. Do not
rely on dynamic mappings even for IPX.

Never Give Up,
Erhan

-----Original Message-----
From: Joe Jia [mailto:ellenjjl@rogers.com]
Sent: 09 May}s 2002 Per~embe 01:55
To: ccielab@groupstudy.com
Subject: Frame-relay Inverse-arp

Hi,

I have been confused by frame-relay inverse-arp and arp frame-relay.
For
example, suppose that Router R1, R2, R3, R4 fully messed to configure
IP.
Only R1 can use subinterfaces, say s0.1 point-to-point (to R4), s0.2
multipoint (to R2 and R3). The requirement is that on R4 can not use
subinterface and map. I also don't want to see R2,R3's IP address on R4,
and
on R2,R3 can't see R4's IP address. (Show Frame-relay map"

With the following configuration, I reloaded the Routers, but still
can't
solve the problem.

(1)on R4 cannot see R2, R3's IP address? Even though on R2, R3, I
configured "no frame-relay inverse" and "no arp frame-relay".

(2)On R4, whether or not put "no arp frame-relay", on R2,R3 can still
see
R4's IP address.

R1:

interface Serial0

no ip address

no ip directed-broadcast

encapsulation frame-relay

no ip mroute-cache

no arp frame-relay

no fair-queue

clockrate 64000

no frame-relay inverse-arp

interface Serial0.1 point-to-point

ip address 137.20.100.2 255.255.255.0

no ip directed-broadcast

frame-relay interface-dlci 131

interface Serial0.2 multipoint

ip address 137.20.101.1 255.255.255.0

no ip directed-broadcast

frame-relay map ip 137.20.101.3 132 broadcast

frame-relay map ip 137.20.101.5 130 broadcast

R4:

interface Serial0

ip address 137.20.100.1 255.255.255.0

no ip directed-broadcast

encapsulation frame-relay

no ip mroute-cache

no arp frame-relay

no fair-queue

clockrate 64000

frame-relay interface-dlci 123

R2:

interface Serial0

ip address 137.20.101.3 255.255.255.0

no ip directed-broadcast

encapsulation frame-relay

no ip mroute-cache

logging event subif-link-status

logging event dlci-status-change

no fair-queue

clockrate 64000

no arp frame-relay

frame-relay map ip 137.20.101.1 231 broadcast

no frame-relay inverse-arp

R3:

interface Serial0

ip address 137.20.101.5 255.255.255.0

no ip directed-broadcast

encapsulation frame-relay

no ip mroute-cache

logging event subif-link-status

logging event dlci-status-change

no fair-queue

clockrate 64000

no arp frame-relay

frame-relay map ip 137.20.101.1 230 broadcast

no frame-relay inverse-arp

Show Frame-relay map:

R1:

Serial0.2 (up): ip 137.20.101.3 dlci 132(0x84,0x2040), static,-`R2

broadcast,

CISCO, status defined, active

Serial0.2 (up): ip 137.20.101.5 dlci 130(0x82,0x2020), static, `R3

broadcast,

CISCO, status defined, active

Serial0.1 (up): point-to-point dlci, dlci 131(0x83,0x2030),
broadcast`R4

status defined, active

R4:

Rack01R2#sh fram map

Serial0 (up): ip 137.20.100.2 dlci 123(0x7B,0x1CB0), dynamic,`R1