From: p729@xxxxxxx
Date: Wed Jun 05 2002 - 03:25:23 GMT-3
Hi,
1) This document explains it better than I ever could: http://www.cisco.com/war
p/public/105/gre_flap.html
2) Hint: Research what the default OSPF timer values are for the different OSPF
interface types.
3) Hints: Represent the network and mask in the SAP ACL in binary. Ones in the
mask must match and zeroes are don't cares. If the least significant bit in the
network is set, then the value is odd. Figure out a network and mask combinati
on that specifies that the least significant bit in the network is set and the
other bit positions are "don't cares" for a match to occur.
Regards,
Mas Kato
https://ecardfile.com/id/mkato
============================================================
From: "stefan slad" <sslad@hotmail.com>
Date: 2002/06/04 Tue PM 11:57:47 EDT
To: ccielab@groupstudy.com
Subject: cyscoexpert sample lab
Hi! I have been working on this very interesting lab. Here are my
question: 1 Recursive routes and tu0 interface . Tu0 is up and down. I
know this problem from bootcamp lab 16. but is there anyone to explain
this in more detail? Why? 2. Changing dead interval without using ip ospf
hello or ip ospf dead interface commands? 3.Filter ipx sap-s form "odd"
networks .Section G3.2? Regards,ss.
------------------------------------------------------------------------
Chat with friends online, try MSN Messenger: Click Here
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:24 GMT-3