From: jfaure@xxxxxxxxxx
Date: Mon Jun 03 2002 - 05:13:28 GMT-3
Yes, when I redistribute from IGRP to OSPF I use the "subnets" option
obviously. The problem, as I said in the first mail, is the redistribution
from OSPF to IGRP: although I've the 150.100.1.0/24 ospf external type 2
route in the R5 table, I can't pass it to the R6 router (this router only
speaks IGRP, the R5 speakes OSPF and IGRP).
Regards.
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
"Cheol"
<netp@enclue.c Para: <jfaure@sztele.com>
om> cc: <ccielab@groupstudy.com>
Asunto: Re: ROUTE INJECTION TO A CLASS
FULL
03/06/02 09:56 PROTOCOL FROM A CLASSLESS ONE
Do you put into the router configuration as keyword "redistribute igrp x x
x x subnet"?
May be make it that you want!!!
===================
=============================================================== (?) ??? ???
???? ???? 13-25 ???? 203? ??: 02-784-0957~8 ??: 02-784-0959 ? ? ?(????
Network Engineer) ???: 016-263-1632
===============================================================
----- Original Message -----
From: <jfaure@sztele.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, June 02, 2002 6:30 AM
Subject: ROUTE INJECTION TO A CLASSFULL PROTOCOL FROM A CLASSLESS ONE
> Hi Guys!
>
>
> I would like to inject to an IGRP domain a route from an OSPF domain.
This
> is my scenario:
>
>
> ROUTERS: R6------------------R5
> --------------------------R2-------------------(EIGRP Network)
>
> R. PROTOCOL IGRP IGRP-OSPF
> EIGRP-OSPF
>
>
> R5 is redistributing OSPF to IGRP and IGRP to OSPF. R2 is doing the same
> with EIGRP and OSPF. The network I want to pass to R6 is a network that
> appears in the R5 routing table as an external type 2 OSPF network
(because
> it comes from the previous EIGRP domain) The problem is that the R6
router
> has a directed connected network of the same classfull address that the
> route I wan to advertise to it. This is, I want to pass the network
> 150.100.1.0/24 (from OSPF, from R5) to R6, but one of the network
> interfaces of R6 has the address 150.100.2.1/24, then it appears in R6 as
> directly connected.
>
> Do you know how can I achieve this? I've tried several thinghs, but I
can't
> pass any 150.100.0.0 IGRP entry to the router table of R6 that points to
> R5.
>
> Regards
>
>
>
>
> Juan Faure Ferrer
> email: jfaure@sztele.com
>
> Lmnea de Negocio de Telematica y CC
> Ingeniero de Integracisn de Redes y Sistemas
>
----------------------------------------------------------------------------
>
> SOLUZIONA TELECOMUNICACIONES
> Servicios Profesionales de UNION FENOSA
> Jerez, 3
> 28016 MADRID
> tel 91 579 30 00 fax 91 350 72 83
>
---------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:21 GMT-3