From: jfaure@xxxxxxxxxx
Date: Sat Jun 01 2002 - 18:30:25 GMT-3
Hi Guys!
I would like to inject to an IGRP domain a route from an OSPF domain. This
is my scenario:
ROUTERS: R6------------------R5
--------------------------R2-------------------(EIGRP Network)
R. PROTOCOL IGRP IGRP-OSPF
EIGRP-OSPF
R5 is redistributing OSPF to IGRP and IGRP to OSPF. R2 is doing the same
with EIGRP and OSPF. The network I want to pass to R6 is a network that
appears in the R5 routing table as an external type 2 OSPF network (because
it comes from the previous EIGRP domain) The problem is that the R6 router
has a directed connected network of the same classfull address that the
route I wan to advertise to it. This is, I want to pass the network
150.100.1.0/24 (from OSPF, from R5) to R6, but one of the network
interfaces of R6 has the address 150.100.2.1/24, then it appears in R6 as
directly connected.
Do you know how can I achieve this? I've tried several thinghs, but I can't
pass any 150.100.0.0 IGRP entry to the router table of R6 that points to
R5.
Regards
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:21 GMT-3