From: Michael Jia (mjia@xxxxxxxxx)
Date: Mon Jun 03 2002 - 01:14:39 GMT-3
Hi,
I need help from DLSW experts in this list.
I have 3 routers.
E0---R1------IP Core-----R2---E0
| |
To0 |
(ring20) |
R3 --To0(ring10)
Dlsw peers has been set up between R1 and R2 so that
their LANs could communicate with each other.
If adding another peer between R1 and R3 with passthru enabled.
Will ring10 talk to E0? Do I also need to config passthru between
R1 and R2.
R1:
dlsw local-peer peer-id 132.1.1.1
dlsw remote-peer 0 tcp 132.1.2.2(R2)
dlsw remote-peer 0 tcp 132.1.3.3 passthru 100
source-bridge ring-group 500 (R1)
source-bridge ring-group 100 (R3)
interface token 0
source-bridge 20 1 500
source-bridge 20 1 100
R3:
dlsw local-peer peer-id 132.1.2.2
dlsw remote-peer 0 tcp 132.1.1.1 passthru 100
source-bridge ring-group 100
interface token 0
source-bridge 10 1 100.
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:21 GMT-3