From: Paul Borghese (pborghese@xxxxxxxxxxxxxx)
Date: Sun Jun 02 2002 - 13:32:52 GMT-3
Oops. To confirm you simply need to send the message back to the list wiht
the same subject line as received. First time posters simply need to hit
reply to confirm the message.
Paul
----- Original Message -----
From: "<[?5AX" <inlink@dreamx.net>
To: <ccielab@groupstudy.com>
Sent: Saturday, June 01, 2002 8:04 PM
Subject: confirm
> confirm
>
> -----Original Message-----
> From: ccielab@groupstudy.com [mailto:ccielab@groupstudy.com]
> Sent: Sunday, June 02, 2002 8:52 AM
> To: inlink@dreamx.net
> Subject: Please confirm (conf#fe52b596433cb0e676fad1f26cc0ca84)
>
>
> Hi,
>
> You have tried to post to GroupStudy.com's CCIELab mailing list. Because
the
> server does not recognize you as a confirmed poster, you will be required
to
> authenticate that you are using a valid e-mail address and are not a
> spammer.
>
> PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS EMAIL
> YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE POSTED.
>
> By confirming this e-mail you certify that you understand the following:
>
> 1. The message does NOT break Cisco's Non-Disclosure requirements.
>
> 2. The message is NOT designed to advertise a commercial product.
>
> 3. All postings become property of GroupStudy.com
>
> 4. You have searched the archives prior to posting.
>
> 5. The message is NOT inflammatory.
>
> 6. The message is NOT a test message.
>
> To confirm, simply reply to this message. No editing is necessary. Once
> confirmed, you will be able to post without additional confirmations.
>
>
> Welcome to GroupStudy.com!
>
>
> ------ORIGINAL MESSAGE---------
>
> >From inlink@mail.dreamx.net Sat Jun 1 19:52:18 2002
> Received: from dreamx.net ([210.181.1.97])
> by groupstudy.com (8.9.3/8.9.3) with ESMTP id TAA31803
> GroupStudy Mailer; Sat, 1 Jun 2002 19:52:15 -0400
> Received: from songnote ([211.218.205.150]) by dreamx.net with Microsoft
SMTPSVC(5.5.1877.647.64);
> Sun, 2 Jun 2002 08:52:57 +0900
> From: =?ks_c_5601-1987?B?vNu/tcHY?= <inlink@dreamx.net>
> To: "ccie" <ccielab@groupstudy.com>
> Subject: Frame-relay switching - tunnel config -2 2501
> Date: Sun, 2 Jun 2002 08:55:20 +0900
> Message-ID: <NGBBLMJLGLBILKOBGEGDGELJCAAA.inlink@dreamx.net>
> MIME-Version: 1.0
> Content-Type: text/plain;
> charset="ks_c_5601-1987"
> X-Priority: 3 (Normal)
> X-MSMail-Priority: Normal
> X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
> Importance: Normal
> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
> Content-Transfer-Encoding: 8bit
> X-MIME-Autoconverted: from base64 to 8bit by groupstudy.com id TAA31803
>
> Hi,all
>
> r1------ Fr1---------------Fr2-------- r4
> | tunnel |
> r2 r3
>
> 1. Fr1 : 2501
> Fr2 : 2501
>
> I tried to combine two combine 2 2501 to act as a single frame relay
switch.
> But Combine 2ea 2501 is not working as FR switch.
> Tunnel interface(eth) status is not active pvc. (T T)
> I wonder that this config is whether possible or impossible.
> Thanks for your advice...
>
> [ Fr1 config ]
> frame-relay switching
> !
> interface Tunnel0
> no ip address
> tunnel source Ethernet0
> tunnel destination 192.168.1.2
> !
> interface Ethernet0
> ip address 192.168.1.1 255.255.255.0
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> clockrate 125000
> frame-relay lmi-type ansi
> frame-relay intf-type dce
> frame-relay route 16 interface Tunnel0 18
> frame-relay route 21 interface Tunnel0 19
> frame-relay route 23 interface Serial1 24
> frame-relay route 25 interface Serial1 26
> !
> interface Serial1
> no ip address
> encapsulation frame-relay
> frame-relay lmi-type ansi
> frame-relay intf-type dce
> frame-relay route 17 interface Tunnel0 20
> frame-relay route 24 interface Serial0 23
> frame-relay route 26 interface Serial0 25
> !
> ip classless
> !
> [ Fr 2]
> frame-relay switching
> !
> interface Tunnel0
> no ip address
> tunnel source Ethernet0
> tunnel destination 192.168.1.1
> !
> interface Ethernet0
> ip address 192.168.1.2 255.255.255.0
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> no fair-queue
> clockrate 125000
> frame-relay lmi-type ansi
> frame-relay intf-type dce
> frame-relay route 18 interface Tunnel0 16
> frame-relay route 19 interface Tunnel0 21
> frame-relay route 20 interface Tunnel0 17
> !
> [Fr2 config ]
> ---^----^---Assistant Manager / General Enterprise Team
> @ () @ Comtec Informations Co., Ltd
> Song young jun inlink@dreamx.net
> Office : 82-2-3289-0244, Mobile :82-18-293-3086
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:21 GMT-3